Looking to Install a firmware flash file on Oppo F7 CPH1819EX? then you are at the right place. Now install the official Stock firmware on Oppo F7 CPH1819EX. Oppo F7 smartphone comes with 6.23-inch and 1080 x 2280 resolution display. It is powered by a 2 MHz octa-core processor alongside 4GB of RAM and a 16-megapixel rear camera.

On this page, we will guide you on how to flash the official stock firmware on Oppo F7 CPH1819EX using the software known as SP Flash Tool, Formally also called Smartphone Flash Tool. By following this guide, you can fix any software-related issue such as hard brick, soft brick, Bluetooth or WiFi issue, GPS issue, lag, the screen of death (SOD), freezing, stuck on boot logo, boot loop, and many more.

Also Read

Oppo F7 CPH1819 DA File – Download MTK Secure Boot Auth File

The Advantage Of Stock ROM:

  • Flash Stock To Unbrick your Oppo F7
  • Flash Stock ROM to Fix the boot loop problem
  • Upgrade and Downgrade Oppo F7
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on Oppo F7
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.

Firmware Details:

  • Gapps File: Included
  • Device Supported: Oppo F7
  • Tool Supported: SP Flash Tool
  • SoC: Mediatek MT6771 Helio P60
  • OS: Android 9.0 Pie

Steps to Install Stock Firmware on Oppo F7:

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.

Pre-requisites

  • Charge your phone: Before you proceed with the below information, you are recommended to ensure that your Oppo F7 is at least 50% charged.
  • Laptop or PC: To carry out this installation, you need a PC or Laptop.
  • Take Device Backup: The very first thing to pay attention to is taking the device backup. You might not be able to take the backup of phone data, however, if you have inserted a memory card in your device, remove it at least to save it.
  • Smartphone Flash Tool: Download the latest SP Flash tool and extract it (Install)
  • VCOM driver: Download VCOM Driver and install on your computer (still compatible with MT67xx phones)
  • Install Latest Driver: Install the Latest Oppo USB Drivers. [For All Android USB Drivers]

Download Firmware Flash Files

Instructions to Install:

  • Make sure you follow and download all the required files and flash tools on your PC.
  • Open the flash tool exe file to open the SP Flash Tool User Interface
  • Tap on the Download option and load both the download agent and the scatter text file in the scatter-loading section.
  • Once you load the file, click the Download button
  • To start the upgrade process, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  • When the phone connects, your device will start upgrading the stock firmware.
  • Wait for a few minutes; if you see a green button on your flash tool, which means the upgrading process has been completed.
  • That’s it! You can reboot your Oppo F7.

For complete tutorials, follow this guide. Additionally, you can follow the video tutorial as well for better guidance.

Warning

I hope you installed the Stock ROM on Oppo F7 successfully, Now please rate this website with your comment. We always welcome feedback and improvements.